{"id":1647,"date":"2026-11-11T10:32:58","date_gmt":"2026-11-11T02:32:58","guid":{"rendered":"https:\/\/jingrui-packingmachine.com\/packing-film-specification\/"},"modified":"2026-11-11T10:34:01","modified_gmt":"2026-11-11T02:34:01","slug":"packing-film-specification","status":"publish","type":"post","link":"https:\/\/jingrui-packingmachine.com\/id\/packing-film-specification\/","title":{"rendered":"Spesifikasi Film Anda Membebani Anda Secara Finansial: Struktur, Ketebalan, Ukuran Gulungan"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">A tomato paste producer in Nigeria switched film suppliers to save 9% on material. Two months later his line was running at 70% of rated speed, bags were arriving at the distributor with wrinkled seals, and about 4% were leaking.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The film was cheaper per kilo. It was also the wrong structure for a VFFS machine running a wet, acidic product at 45 bags a minute.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Film is the part of a packing line where buyers negotiate hardest and specify least. A quote usually says &#8220;laminate, 90 micron&#8221; and nothing else. That single number hides four properties that decide whether the machine runs at speed or fights you all shift.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What a film specification actually contains<\/h2>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"992\" height=\"1024\" src=\"https:\/\/jingrui-packingmachine.com\/wp-content\/uploads\/2025\/03\/\u9ad8\u901f\u5305\u88c5\u673a-992x1024.jpg\" alt=\"Vertical form fill seal packing machine running a laminated film\" class=\"wp-image-1263\" srcset=\"https:\/\/jingrui-packingmachine.com\/wp-content\/uploads\/2025\/03\/\u9ad8\u901f\u5305\u88c5\u673a-992x1024.jpg 992w, https:\/\/jingrui-packingmachine.com\/wp-content\/uploads\/2025\/03\/\u9ad8\u901f\u5305\u88c5\u673a-291x300.jpg 291w, https:\/\/jingrui-packingmachine.com\/wp-content\/uploads\/2025\/03\/\u9ad8\u901f\u5305\u88c5\u673a-768x793.jpg 768w, https:\/\/jingrui-packingmachine.com\/wp-content\/uploads\/2025\/03\/\u9ad8\u901f\u5305\u88c5\u673a-1488x1536.jpg 1488w, https:\/\/jingrui-packingmachine.com\/wp-content\/uploads\/2025\/03\/\u9ad8\u901f\u5305\u88c5\u673a-1984x2048.jpg 1984w, https:\/\/jingrui-packingmachine.com\/wp-content\/uploads\/2025\/03\/\u9ad8\u901f\u5305\u88c5\u673a-12x12.jpg 12w, https:\/\/jingrui-packingmachine.com\/wp-content\/uploads\/2025\/03\/\u9ad8\u901f\u5305\u88c5\u673a-600x619.jpg 600w, https:\/\/jingrui-packingmachine.com\/wp-content\/uploads\/2025\/03\/\u9ad8\u901f\u5305\u88c5\u673a-150x155.jpg 150w\" sizes=\"(max-width: 992px) 100vw, 992px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>The structure, layer by layer.<\/strong> A typical three-layer laminate is printed PET or OPP on the outside for strength, a barrier layer in the middle (metallised, foil, or EVOH), and a sealant layer inside (PE or CPP). Each layer does a different job, and swapping one to save money breaks a specific thing: drop the barrier and shelf life collapses; drop the outer layer&#8217;s thickness and the print scuffs in transit; change the sealant and the jaws no longer seal at your temperature.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Total thickness versus sealant thickness.<\/strong> This is the number that causes the most failures. A 90 micron laminate with a 12 micron sealant layer will not hold a 500 g bag through a container, no matter what the total thickness says. For a standard VFFS bag we want 25\u201340 micron of sealant. Buyers who negotiate on total micron alone routinely end up with a thin sealant and a &#8220;mystery&#8221; leak rate.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Coefficient of friction.<\/strong> COF decides whether the film slides cleanly over the forming tube or drags. Too high and the film wrinkles at the shoulder, which produces dog-ears and off-centre seals. Too low and the roll telescopes on the unwind. Most VFFS lines want a COF around 0.2\u20130.3 on the inside surface, and film suppliers who do not publish it usually have not measured it.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Roll geometry and splices.<\/strong> Roll diameter, core size (76 mm or 152 mm), and the number of splices per roll all affect uptime. A splice means a stop, a re-thread, and often 20 bags of waste. If your machine uses a 76 mm core and the cheap film ships on 152 mm, you need new chucks before you run a single bag.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">The four mistakes that show up on the line<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Buying film by price per kilo.<\/strong> Film cost per bag is what matters: a 90 micron film at $3.10\/kg and an 80 micron at $3.40\/kg are not comparable until you multiply by grams per bag. We have seen a 12% cheaper roll cost 20% more per bag after thickness and waste were counted.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Changing one layer to hit a price target.<\/strong> The most common version is thinning the sealant. It saves real money on paper and shows up as a leak rate three months later, usually after the first export container.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Ignoring the product&#8217;s chemistry.<\/strong> Acidic products, oily products, and products with fine powder each need a different sealant. A film that seals beautifully on dry rice can fail on tomato paste because the seal is contaminated by product at the jaw and the sealant cannot flow through it.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Forgetting the machine&#8217;s own limits.<\/strong> A VFFS former is machined for a film thickness range and a stiffness range. Running a film that is too stiff causes tracking problems; too soft and the bag will not hold its shape in the forming tube.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If your leaks started after a film change, the sequence to check is in [why bags leak](https:\/\/jingrui-packingmachine.com\/bag-seal-failure-causes\/): film first, machine second, settings last.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What to ask for in writing<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Ask for the full structure with layer thicknesses, not the total. Ask for the sealant type and its sealing temperature range. Ask for COF on both surfaces. Ask for the OTR and WVTR figures if shelf life matters \u2014 and read [where oxygen actually gets in](https:\/\/jingrui-packingmachine.com\/nitrogen-flushing-residual-oxygen\/) before you accept a barrier claim.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Ask for a 50 kg sample roll of the production film, not a lab sample, and run it on your machine for a full shift before you commit to a container. Lab samples are made on different equipment and often behave differently on a high-speed former.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Finally, ask what the film&#8217;s shrink and stretch behaviour is at your sealing temperature. A laminate that shrinks 2% at 180 \u00b0C will pull away from the seal bar and leave a channel, and no parameter change fixes a film that was not designed for that heat.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">When a cheaper film is the right answer<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Not every product needs a foil barrier. Dry, short-shelf-life goods \u2014 salt, sugar, pasta, detergent powder \u2014 run perfectly on a simple two-layer laminate with a 30 micron sealant, and paying for EVOH on those products is money burnt.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The rule we give buyers: barrier follows shelf life and fat content, not fashion. Under three months and low fat, a standard laminate is correct. Over nine months or high oil content, you need the barrier, and the film will cost 25\u201340% more per kilo. Budget for it at the quoting stage instead of discovering it after the first rejected container.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For the bag format side of the same decision, the [pillow versus stand-up versus brick bag comparison](https:\/\/jingrui-packingmachine.com\/pillow-bag-vs-stand-up-pouch-vs-brick-bag\/) covers which structures each format needs, and the [VFFS machine range](https:\/\/jingrui-packingmachine.com\/product-category\/vffs-packing-machines\/) lists the film thickness each former is built for.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Send us your product, bag size, shelf-life target, and the film quote you have, and we will tell you which of the four properties is wrong before you place the order.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>FAQ<\/strong><\/h2>\n\n\n\n<div class=\"wp-block-wpseopress-faq-block-v2 is-layout-flow wp-block-wpseopress-faq-block-v2-is-layout-flow\">\n<details class=\"wp-block-details is-layout-flow wp-block-details-is-layout-flow\"><summary>What film thickness do I need for a 500 g bag?<\/summary>\n\n<p class=\"wp-block-paragraph\">Total thickness is less important than the sealant layer. For a 500 g bag on a VFFS machine, 70 to 100 micron total with a 25 to 40 micron sealant layer covers most dry and semi-dry products. Below 20 micron of sealant, the seal will not survive stacking and transport even if the bag looks perfect on the line.<\/p>\n\n<\/details>\n\n\n<details class=\"wp-block-details is-layout-flow wp-block-details-is-layout-flow\"><summary>Can the same film run powder and liquid products?<\/summary>\n\n<p class=\"wp-block-paragraph\">Usually not. Powders need a sealant that flows through dust contamination at the jaw, and liquids need one that seals through a wet surface and resists the product&#8217;s chemistry. Acidic pastes and oily products also attack standard PE over time. Ask for the sealant type by name, not just the film&#8217;s total thickness.<\/p>\n\n<\/details>\n\n\n<details class=\"wp-block-details is-layout-flow wp-block-details-is-layout-flow\"><summary>Why does my film tear or wrinkle at the forming tube?<\/summary>\n\n<p class=\"wp-block-paragraph\">Almost always friction or stiffness. A film whose coefficient of friction is too high drags on the shoulder and wrinkles; one that is too stiff will not wrap the tube cleanly and tears at the seam. Both are specification problems, not machine settings, and the fix is a film with the right COF for your former.<\/p>\n\n<\/details>\n<\/div>\n<script type=\"application\/ld+json\">{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What film thickness do I need for a 500 g bag?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Total thickness is less important than the sealant layer. For a 500 g bag on a VFFS machine, 70 to 100 micron total with a 25 to 40 micron sealant layer covers most dry and semi-dry products. Below 20 micron of sealant, the seal will not survive stacking and transport even if the bag looks perfect on the line.\"}},{\"@type\":\"Question\",\"name\":\"Can the same film run powder and liquid products?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Usually not. Powders need a sealant that flows through dust contamination at the jaw, and liquids need one that seals through a wet surface and resists the product\\u0027s chemistry. Acidic pastes and oily products also attack standard PE over time. Ask for the sealant type by name, not just the film\\u0027s total thickness.\"}},{\"@type\":\"Question\",\"name\":\"Why does my film tear or wrinkle at the forming tube?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Almost always friction or stiffness. A film whose coefficient of friction is too high drags on the shoulder and wrinkles; one that is too stiff will not wrap the tube cleanly and tears at the seam. Both are specification problems, not machine settings, and the fix is a film with the right COF for your former.\"}}]}<\/script>","protected":false},"excerpt":{"rendered":"<p>Laminasi murah harganya lebih mahal per kantong daripada yang terlihat. Apa sebenarnya isi spesifikasi film, empat kesalahan yang muncul di lini produksi, dan apa yang harus diminta.<\/p>","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"Packaging Film Spec %%sep%% %%sitetitle%%","_seopress_titles_desc":"A cheap laminate costs more per bag than it looks. What a film spec really contains, the four mistakes that show up on the line, and exactly what to ask for.","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"","_seopress_redirections_param":"","_seopress_redirections_type":0,"_seopress_analysis_target_kw":"","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":[],"_seopress_pro_schemas":[],"footnotes":"","ilj_linkdefinition":["packaging film specification","laminate structure packing","film sealant layer","roll size packing machine","film coefficient of friction"]},"categories":[1],"tags":[],"class_list":["post-1647","post","type-post","status-publish","format-standard","category-press-releases"],"_links":{"self":[{"href":"https:\/\/jingrui-packingmachine.com\/id\/wp-json\/wp\/v2\/posts\/1647","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jingrui-packingmachine.com\/id\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/jingrui-packingmachine.com\/id\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/jingrui-packingmachine.com\/id\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/jingrui-packingmachine.com\/id\/wp-json\/wp\/v2\/comments?post=1647"}],"version-history":[{"count":1,"href":"https:\/\/jingrui-packingmachine.com\/id\/wp-json\/wp\/v2\/posts\/1647\/revisions"}],"predecessor-version":[{"id":1649,"href":"https:\/\/jingrui-packingmachine.com\/id\/wp-json\/wp\/v2\/posts\/1647\/revisions\/1649"}],"wp:attachment":[{"href":"https:\/\/jingrui-packingmachine.com\/id\/wp-json\/wp\/v2\/media?parent=1647"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/jingrui-packingmachine.com\/id\/wp-json\/wp\/v2\/categories?post=1647"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/jingrui-packingmachine.com\/id\/wp-json\/wp\/v2\/tags?post=1647"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}